Raw Sewage Cleanup
Sewage cleanup removes Category 3 black water from raw sewage, then disinfects and dries the area.
See raw sewage cleanupGet Category 3 sewage removed after a backup in a basement, shower, floor drain or lower level in East Newnan. The work includes contaminated-material removal, cleaning, disinfection, structural drying and odor control.
Sewer backup cleanup is a safe process for taking out sewage solids and wastewater when a toilet, sewer line or drain overflows. The process continues with disinfection, cleaning, odor control and drying wherever the overflow reached.
A toilet, utility sink, shower or basement floor drain can become the entry point for a sewer backup. From there, water can reach nearby rooms and move behind baseboards or below appliances. Treat sewage as Category 3 black water and do not touch it, including when surfaces appear dry or the water seems diluted.
Ordinary water damage methods are not enough for this cleanup. Cleanup technicians put on protective equipment, isolate the affected space and extract sewage. Contaminated materials that cannot be cleaned completely are taken out. They wash hard surfaces before applying an EPA-registered disinfectant for its labeled contact time. Drying, moisture measurements and a record of each step complete the process.

Work records, moisture details, photos and lists of affected materials may help when you speak with the property manager or insurance adjuster.
Your possessions are grouped as cleanable, unsuitable for recovery or requiring specialist care, and significant belongings are discussed before removal.
Clean rooms remain isolated while technicians use protective equipment to remove wastewater and transfer contaminated materials.
You receive an explanation of affected rooms and materials, cleanable items, possible removals and drying checks, allowing you to move forward with a defined scope.
Sewer cleanup becomes necessary if wastewater leaves a plumbing fixture or line and flows into storage or occupied areas. Common examples follow:
Wastewater rises through a floor drain and spreads across concrete, finished flooring, stored belongings or the base of walls.
Wastewater spreads beyond the drain into a laundry room, garden unit or another space located below grade.
A blockage in a toilet or main line can push sewage through a tub or shower, leaving the floor, tile and grout contaminated.
Wastewater enters a restroom, retail space, office or storage area where access and surrounding areas must be controlled.
Your first actions should reduce exposure and prevent additional wastewater from reaching the area, although each backup is different. If the event is part of a larger emergency response, obey access limits set by firefighters, law enforcement or utilities. Before sewer backup cleaning starts, take the following steps:
Call (888) 440-9227The nearest published cost information for this service covers sewage biohazard cleanup. Cited sources put most homeowner work in a range starting at $2,000 and ending at $10,000. One other published pricing source starts its wider span at $1,500 and ends it at $8,000. Final sewer backup cleanup cost varies with the size of the affected space, sewage absorption, disposal needs and the drying required.
Published national cost guides are the source for these ranges, rather than an inspection of your property. An on-site assessment determines your property's price, which is explained to you before the cleanup starts.
Ask about cost: (888) 440-9227Whether insurance applies depends on the specific policy and the reason for the backup. A standard property policy might exclude water entering from a sewer or drain if you did not add a sewer backup endorsement.
Ask about required advance approval, records for the adjuster, coverage for emergency response and mitigation, and documentation of materials discarded because of health concerns.
Ask the insurance company whether your policy includes sewer or drain backup coverage, what deductible applies and whether damaged contents and cleanup services are included.
A building owner may address the plumbing and structure, while a renter's policy may address personal property. Responsibility and coverage depend on the lease, cause and policies.
Your documentation should include photos, moisture readings, listed items, plumbing findings and cleanup records. Stay out if taking photos would require unsafe entry.
Sewer backup restoration services start after the active flow is stopped. Cleanup involves a controlled order so dirty water is not carried into clean parts of the property. The cleanup crew should explain the entire process before work begins.
The cleanup crew locates the visible boundary, checks nearby rooms and uses moisture readings to find water that moved beneath or behind surfaces.
The affected area is separated from clean space. Every situation requires protective equipment suited to sewage water, splashes and contaminated debris.
Dedicated contaminated-water equipment extracts pooled sewage and solid waste. Throughout every step, keep equipment and waste within the contained zone so the detailed cleaning process can follow.
Porous items that cannot be fully disinfected, including carpet, padding, swollen drywall and damp insulation, require careful containment and removal. Hazardous materials not related to the sewage need their own assessment and proper waste process.
Removing soil by washing retained hard surfaces advances the remediation process. Next, an EPA-registered disinfectant stays on the surface for the label's full contact time.
To dry the structure, the cleanup involves dehumidifiers and equipment that moves air. Moisture readings guide equipment placement and show when hidden materials need more attention.
Removal of the source comes first. Air filtration and targeted odor treatment can then address smells left in the affected area and nearby materials.
A final check looks for odor, residual moisture and any visible dirt in the cleaned space. Photos and records give property owners documentation of the entire process, including removals and items left behind, for insurance companies.
Call any hour. A specialist in sewer backup cleanup takes your call, explains each step and agrees on a start time with you.
Raw sewage can pose serious health risks because it may contain bodily fluids, harmful microorganisms and contaminated debris. Exposure can result from skin contact, splashes or wastewater carried on footwear.
Removed carpet, pad, drywall and porous contents must be contained so wastewater is not spread through the building or into surrounding areas during waste disposal.
Sewage is treated as Category 3 black water because it may contain disease-causing organisms. Gloves alone do not control splashes, wet clothing or contamination carried on footwear.
According to the EPA, wet materials may start growing mold within 24 to 48 hours. Once the plumbing source is stopped, sewage removal and structural drying both remain important.
Can you clean it yourself? Only consider cleaning a very limited non-porous area when you have protective gear and can rule out electrical danger and exposure to anyone vulnerable. When the affected limits are hidden or sewage reaches drywall, carpet, insulation, wood or a wall cavity, professional sewage cleanup is safer.
Keeping a non-porous, hard material may be possible when every side is reachable and can be both cleaned and disinfected. Removal is often required for porous materials that have soaked up sewage. Any separate hazardous material in the work area must be assessed independently and kept out of the sewage debris.

Sewer backup restoration takes as long as needed to remove sewage, address contaminated materials and bring the remaining structure to acceptable moisture conditions. Other restoration services or repairs come afterward, when the cleaned structure has dried. Room count alone matters less than backup size, the affected materials and water hidden from view.
| Scene | Typical time on site |
|---|---|
| Small hard-surface area | Extraction and cleaning may conclude after moisture checks without drying the structure |
| Finished room with porous materials | Moisture measurements determine when ongoing removal, drying and disinfection can end |
| Several rooms or hidden cavities | Work lasts longer if walls, floors, insulation or cabinetry require opening and drying |
Removing sewage is the first step in sewer odor removal. Bleach, added fragrance and surface sprays do not fix wastewater caught inside drywall, beneath a floor or within absorbent belongings. Odor that comes back after visible water has disappeared may point to moisture or contamination that remains hidden.
Once contaminated material is gone and cleaning of hard surfaces is complete, HEPA filtration can help lower airborne particles. Air movement and dehumidifiers assist with appropriate drying. Source removal must precede odor treatment. Nearby cabinets, rooms and HVAC openings are also inspected for remaining moisture or contamination.
The full sewer backup cleanup guide covers what is cleaned or removed, odor and air quality work, and the rules that apply in Coweta County.
Read the full sewer backup cleanup guide
Containment, entry and cleanup plans can be influenced by local housing, population and access details.
At 31.5% renter occupancy, cleanup needs vary between leased units and owner occupied homes, especially around authorization for demolition.
In housing built around 1967, a moisture check can help define how far sewage or cleaning water traveled.
The 63 seniors living alone may need support from relatives or trusted contacts when a cleanup decision follows a medical emergency.
The local 90.4% single-family share makes household level privacy practical while affected rooms are isolated and treated.
You can ask about cleanup in nearby communities and ZIP codes during the call.
Sewage cleanup removes Category 3 black water from raw sewage, then disinfects and dries the area.
See raw sewage cleanup
Sewage cleanup in a crawl space addresses contaminated soil and saturated insulation.
See crawl space sewage cleanup
Blood, body fluids and other infectious materials are removed, followed by property disinfection.
See biohazard cleanup
Full decontamination of rooms, surfaces and air after infectious or hazardous exposure.
See biohazard decontamination
Biological remediation that removes contamination and returns a space to safe use.
See biohazard remediation
Human feces cleanup and disinfection in homes, rentals and public restrooms.
See human feces cleanup
Infectious disease disinfection with EPA-registered products and full surface coverage.
See infectious disease disinfection
Once a scene is released, biohazard cleanup can start at any hour.
See emergency 24/7 biohazard cleanupKeep the shower, toilet and surrounding drains unused until the plumbing receives a plumber's inspection. Prevent wastewater from touching bare skin. Soil must be removed before cleaning and disinfecting the shower, floor, drain surround and adjacent surfaces. Materials such as wood, carpet, cabinets and drywall need an absorption assessment if escaped wastewater reached them.
Keep everyone and all pets out, stop using the plumbing and arrange correction of the blockage. Next comes wastewater extraction, removal of porous materials that absorbed it and hard-surface washing. An EPA-registered disinfectant receives its complete contact time before the building is dried. Moisture concealed below flooring or behind baseboards also requires attention.
Contact the proper sewer authority or a plumber to find and stop the cause. For the property, look for sewage cleanup services that explain containment, material removal, disinfection, drying and documentation. Keep everyone away when water reaches electrical equipment. Before anyone enters the water, call a qualified electrician or the utility.
Published sewage biohazard cost sources most closely related to this work put typical or most homeowner jobs at $2,000 to $10,000. A broader span of $1,500 to $8,000 appears in a published pricing source. The true cost depends on square footage and access, plus Category 3 water, porous removals, drying needs and contaminated-waste disposal.
Yes. The possible presence of harmful microbes and contaminated debris means raw sewage is treated as Category 3 black water. Keep away from direct contact, isolate the space and never use a regular home vacuum. Cleaning should address the visible wastewater, absorbed contamination, moisture, waste disposal, odor and surrounding surfaces reached by foot traffic.
There is no single safe waiting period or predictable time for symptoms. Risk varies based on personal health, what the wastewater contained and how someone encountered it. Right away, wash any skin exposed during the incident. After meaningful contact, speak with a medical professional or contact poison control for advice, particularly when sewage reaches the mouth or eyes.
Respectful, discreet sewer backup cleanup is available 24 hours a day, and crews arrive in unmarked vehicles.